各齿轮均采用硬齿面和磨齿工艺；

All gears adopt hard tooth surface and grinding process;

各传动轴均采用加强型设计；

All transmission shafts adopt reinforced design;

采用大直径轧辊，轧辊直径¢104，与传统轧辊相比，更易咬入，相同产能下可获得更低的转速和更高的强度；

Large-diameter rolling rolls are used, with a roll diameter of ¢104. Compared with traditional rolling rolls, they are more easily bitten into, and under the same production capacity, lower speed and higher strength can be obtained.

各部件的密封和润滑都采用双层密封；

All parts are sealed and lubricated with double-layer sealing;

电机功率22KW，配齿轮减速箱与主箱体直连，并采用变频调速；（变频器品牌为台达）

The motor power is 22KW, and it is directly connected to the main gearbox with a gear reduction box, and uses frequency conversion speed regulation; (The brand of the frequency converter is Delta)

轧线范围：¢16¢5.5，一个主箱，八个分箱。轧制速度：最快每分钟出线64米。

Rolling range: ¢16¢5.5, one main box, eight sub-boxes. Rolling speed: the fastest output speed is 64 meters per minute.